Get Adobe Flash player
GuardMagic FSM series

GuardMagic FSM series Series of GSM/GPRS fuel storage monitoring modules. Modules also are ready for: diesel generator monitoring, temperature monitoring, freezer monitoring. GuardMagic FSM modules is intended for the construction: fuel storage monitoring system; diesel generator monitoring system, temperature monitoring system. Base module: GuardMagic FSM2


GuardMagic FSM series - the table of comprasion
The main function of GuardMagic FSM series modules is shown in below table:

Type of function

GuardMagic FSM series

FSM1 FSM2 FSM3
1 Power source


1.1 Main Power 9... 12 V DC + + +
1.2 External reserve battery (6,3 V , 1,2 A/h) + + +





2. Inputs in general


2.1 Logical inputs (ummary) 4 4 4
2.2 Pulse inputs (frequency or counter) 2 2 2
2.3 Analog input (analog fuel inputs) 1 - -
2.4 EIA- 485 interface (digital fuel sensors connection) - 1 1
2.5 1-Wire interface - 1 2





2. Main connection


2.1 Total fuel level sensors (fuel tank or fuel compartments monitoring) 1 3 7
2.2 Analog fuel level sensor 1 - -
2.3 Fuel level sensors with digital communication interface EIA-485 (GuardMagic DFLS3, GuardMagic DFLS4 or with the same communication protocol) up to: - 3 7
2.4 Tamper sensor or tamper circuit (logical) 1 1 1
2.5 Customer logical sensor or circuits 3 3 3
2.6 Pulse circuits or sensors (for example: Flow meter, engine RPM etc.) 2 2 2
2.7 Temperature sensors up to: - 7 7





3. Main technical data and function


3.1 "Fuel resolution (on EIA-485 bus, depend of type of sensors) up to levels: - 1024 or 4096 1024 or 4096
3.2 Functionality: operation mode, programming mode - + +
3.3 Operation mode: Real Time, Packet, logger + + +
3.4 Data transmitting: GSM/GPRS 900/1800/1900 or Quad + + +
3.5 GPRS connection to monitoring station: main or reserve + + +
3.6 Internal memory (to store collected data) + + +
3.7 Automatic storing collecting information if GPRS or Internet
connection is absence.
+ + +
3.8 Automatic transmitting (or storing) data from fuel level sensors
and external sensors
+ + +
3.9 Connection to temperature sensors - + +
3.10 Staff identification - - +
3.11 Automatic activation for data sending (alarm data):
 Tamper;
 Logical inputs activation;
 Fueling or Fuel drain over;
 Main power alarm (if reserve battery connect);
 Pulse signal starting.
+ + +
3.12 User programming periodicity of data sending + + +





4. Additional


4.1 Main Power control (if reserve battery connecting) + + +
4.2 Possibility connection to pulse flow meter and/or engine RPM
sensor (pulse counting)
+ + +
4.3 Base station time synchronization + + +
4.4 Available edition:
  • "/1" - Standard (inside application);
  • "/2" -Dust and water resistance (outside application, IP 56
    plastic enclosure);
  • "/3" - anti vandal, dust and water resistance (outside
    application, IP 65 aluminium enclosure)
+ + +
Application:

Fuel Storage Monitoring Diesel Generator Monitoring Temperature Monitoring Refrigerator, Freezer Monitoring
Бүтээгдэхүүн үйлчилгээ